搜索
News Center
Your location:
Homepage
/
/
The heat exchanger manufacturer tells you the maintenance of the heat exchanger

The heat exchanger manufacturer tells you the maintenance of the heat exchanger

(Summary description)The heat exchanger manufacturer tells you to pay attention to the maintenance of the heat exchanger. The professional heat exchanger manufacturer of Nantong Safe Machinery tells you the general knowledge about the maintenance of the heat exchanger. Safety benefits If the oil and gas are not recovered, this gas will diffuse in the oil platform area, and then interact with the air. Mixing, it is easy to form explosive gas, because the large amount of oil and gas is extremely unfavorable to the safety of oil filling operation, accidental combustion may cause combustion and explosion. After recovery, the oil loading station eliminates an extremely important hidden danger factor in safe production.

The heat exchanger manufacturer tells you the maintenance of the heat exchanger

(Summary description)The heat exchanger manufacturer tells you to pay attention to the maintenance of the heat exchanger. The professional heat exchanger manufacturer of Nantong Safe Machinery tells you the general knowledge about the maintenance of the heat exchanger. Safety benefits If the oil and gas are not recovered, this gas will diffuse in the oil platform area, and then interact with the air. Mixing, it is easy to form explosive gas, because the large amount of oil and gas is extremely unfavorable to the safety of oil filling operation, accidental combustion may cause combustion and explosion. After recovery, the oil loading station eliminates an extremely important hidden danger factor in safe production.

Information

The heat exchanger manufacturer tells you to pay attention to the maintenance of the heat exchanger

Nantong Safe Machinery's professional heat exchanger manufacturer tells you the common sense of heat exchanger maintenance

Safety Benefits If the oil and gas are not recovered, this gas will diffuse in the oil loading platform area and mix with air. It is easy to form explosive gas. Due to the large amount of oil and gas, it is extremely unfavorable to the safety of oil loading operation, and accidentally may cause combustion and explosion. After recovery, the oil loading station eliminates an extremely important hidden danger factor in safe production. After the transformation of the production operation, the oil and gas recovery process is shorter, the heat exchanger process conditions are easy to operate, and two operators per shift can ensure the normal operation of the device.

Through analysis and demonstration of the safety of the rich gas, the processing capacity of the device, the simulation calculation of the heat balance of the process equipment, etc., it is feasible to use the existing equipment to change to diesel oil to absorb oil and gas. In order to further improve the performance of the heat exchanger device, it is recommended:

At the same time, start two lean oil pumps to increase the absorbed dose and reduce the temperature of the diesel tower to the lowest. Assuming it is 32℃, the recovery volume can be increased by 20Okg/h through simulation calculation. However, the circulating water volume needs to be mentioned 3ot/h, and the area of ​​the secondary heat exchanger needs to be increased by 30-40mZ.

Increasing the pressure of the Roots blower increases the absorption pressure in the tower, thereby increasing the absorption rate.

Using water as the fluid power of the ejector can save diesel circulation, and improve the separation capacity of the liquid separation tank through modification, so that water and diesel can be completely separated.

Try to reduce the absorption temperature of diesel oil, thereby improving the efficiency of the absorption tower.

Nantong Safe Machinery is looking forward to cooperating with you!

Scan the QR code to read on your phone

Related News

There is currently no information to display
Please add data record on website background.
There is currently no information to display
Please add data record on website background.
There is currently no content to display
Please add data record on website background.

SAFE Machinery

Sales Hotline: +86-513-87545076
Contact Us

Condenser, reaction kettle, various towers, evaporator: 86-13773778255

High efficiency heat exchanger: 86-18015913066
Petrochemical complete equipment: 86-15370620536

Tower, reactor, storage tank: 86-13376112662

Northern Region: 86-13584740566

Central China Region: 86-13625232949

E-mail: sfjx@shuangmachem.com

Mobile

Mobile

Wechat

Wechat

Copyright © 2021  Nantong SAFE Machinery Co., Ltd.   All Rights Reserved   苏ICP备14056193号